Click image to view full size image
DR-5000 multi-parameter water analyzer is a highly integrated measured parameter wall-mounted equipment which can test the parameter all in one, compact structure, with input probe, with high degree of intelligence and flexibility, widely used in water supply, municipal, farming and other industries.
Product Feature
• Can be connected with an analog or digital sensor, readily assembled into a conventional five-parameter water quality analysis instrument.
• DC12V can supply current of less than 500mA, can use solar powered.
• Controller whole intelligent, automatic identification of sensor.
• Display the SD card storage data on the computer.
• Can calibrate the sensor both in the scene and in the lab.
• 4.3-inch LCD display, showing beautiful, easy manipulation, can display multiple parameters in the same time.
• With power protection and automatic recovery function call, parameter settings after power is not lost.
• No reagent filling, no reagent consumption.
Specifications
• Power:85-265VAC , 20W;
• Meter size (width X height X thickness): 320X260X130:
• 4-20mA analog and RS485 digital output, MODBUS protocol;
Specification
Product Feature
• Can be connected with an analog or digital sensor, readily assembled into a conventional five-parameter water quality analysis instrument.
• DC12V can supply current of less than 500mA, can use solar powered.
• Controller whole intelligent, automatic identification of sensor.
• Display the SD card storage data on the computer.
• Can calibrate the sensor both in the scene and in the lab.
• 4.3-inch LCD display, showing beautiful, easy manipulation, can display multiple parameters in the same time.
• With power protection and automatic recovery function call, parameter settings after power is not lost.
• No reagent filling, no reagent consumption.
Specifications
• Power:85-265VAC , 20W;
• Meter size (width X height X thickness): 320X260X130:
• 4-20mA analog and RS485 digital output, MODBUS protocol;
Specification
| Temperature |  |
|
| Principle | platinum resistance temperature sensor | |
| Range | -10 ~ 150°C | |
| Accuracy | ± 0.2 °C | |
| Installation | bracket mounting | |
| PH / ORP | ||
| Principle: | glass electrode method | |
| Range | -2000 ~ + 2000mv / -2 ~ 14 pH | |
| Sensitivity | ≤ ± 0.5mV / ± 0.01 pH | |
| Compensation | 0 ~ 105 °C | |
| Response Time | <50 seconds | |
| Installation | bracket mounting | |
| Dissolved Oxygen Sensor |  |
|
| Principle | Fluorescence | |
| Measuring Range | 0 ~20.00 mg/L, -5 ~60 °C | |
| Accuracy | ≤0.1 mg/L | |
| Resolution | ≤0.01 mg/L | |
| Compensation | 0 ~ 50 °C | |
| Response Time | 60 seconds; | |
| Repeatability | 0.05mg/L | |
| Installation | bracket mounting | |
| Conductivity Sensor | 
|
|
| Principle | Electromagnetic method | |
| Measuring Range | 0~200~2,000~20000µS/cm. | |
| 0~2~20~200~2000mS/cm | ||
| Temperature | -10~200 °C | |
| Repeatability | ±1% | |
| Accuracy | ±0.01 % | |
| Calibration | Standard Solution KCL,25 °C | |
| Compensation | -20 ~100 °C | |
| Response | <60 seconds | |
| Installation | bracket mounting | |
| Turbidity Sensor | 
|
|
| Principle | near-infrared 90°scatter | |
| Range | 0.001-4000NTU | |
| Resolution | ≤0.01NTU or 0.1NTU | |
| Accuracy | ±0.5%FSD | |
| Reproducibility | ±1.0%F.S | |